Scroll to top

ULTRAJET UJ20-500

ULTRAJET UJ20-500

ULTRAJET UJ20-500 is a professional heavy-duty High Pressure Water Blaster with a high performance crank shaft, ceramic pistons and the simplest design – aimed to reduce the Total Cost of Ownership (TCOO). It is suitable for a wide range of applications, and extremely mobile and compact, it is designed to reduce the complexity of maintenance without compromising the quality and durability for heavy duty usage under the toughest conditions.

 

Professional heavy-duty high-pressure water blaster with a high-performance crank shaft, ceramic pistons and stainless steel frame designed for long hours usage.

Cold water high pressure cleaner with 3 cylinder inline plunger pump coupled to low rpm electric motor (1750rpm at 60hz frequency). Thermo valve protects pump from overheating and water shortage control protects pump from air cavitation. Water micro filter protects pump from soiled water. Motor/pump unit protected by solid, surrounding stainless steel frame and 4 solid rubber wheels.

Standard Equipment

  • 15 meter 4-core oil resistance electric cable with 4- pin plug
  • Stainless Steel lance 1000 mm with quick screw coupling for easy nozzle change
  • Heavy duty 500bars trigger gun
  • 20m wear resistance high pressure hose with stainless steel fittings
  • Inlet filter
  • Tool for opening filter cartridge
  • User manual with part list

Machine Highlights

  • Made in EU with 100% EU components
  • Sturdy full stainless steel tubular frame
  • Triplex ceramic plungers pump
  • Asynchronous three-phase 15 kW high-efficiency IP55 motor
  • Low water inlet pressure protection switch and alarm
  • Unloader valve with pressure release
  • Stainless steel pressure gauge with glycerin
  • 50 microns water filter with replaceable cartridge
  • Control panel with emergency stop and low water inlet pressure sensor error light
  • Thermal protection valve to protect damage to pump seals

Optional Accessories

  • Extension hoses with connectors
  • Extension cables
  • Rotating nozzle
  • Drain and pipe cleaning nozzles
  • Spare part kits
  • Sandblasting kit with boron carbide nozzle
  • High Pressure protection clothing, helmet with face shield and earmuff
  • Hose protection

Read and comply with these original instructions prior to the initial operation of the machine. Before first start-up it is necessary to read the operating instructions and safety indications.

Machine Start Up

➔ Connect water supply hose to the water inlet of machine

➔ Connect the high-pressure hose with the trigger gun to the outlet fitting of the machine. (use only original hose supplied by ASEA Marine)

➔ Turn on the water supply (Ensure sufficient water supply with a minimum inlet pressure of 2bar and 20 l/min)

➔ Plug in main power supply and switched it on**

➔ Pressed the start button on the electrical panel box

➔ Pressed lever on the trigger handle, and you can begin operating with your machine.

**Note: When you switched on the mains and the red Led light on the starter panel box is on, it means the water supply pressure (min 1 bar and above) is weak, and you will not be able to turn on the machine for safety reason. Please try other water supply source with higher pressure.

**First oil change after 50 operating hours, further oil changes after every 500 operating hours. (recommended oil SAE 10/40W).

We use cookies to give you the best experience.